HDS300 Series Digital Oscilloscope
HDS300 Series Digital Oscilloscope

HDS300 Series Digital Oscilloscope

  • Oscilloscope + Multimeter + Waveform Generator – multifunction in one device
  • 3.5" high-resolution color LCD (high contrast, outdoor-friendly)
  • Built-in 18650 lithium battery with USB Type-C charging
  • Supports power bank & PC software connection
  • SCPI supported for secondary development
  • Self-calibration function

Oscilloscope Specifications

Model HDS307S HDS310S HDS320S
Bandwidth 70MHz 100MHz 200MHz
Channel 2 + 1 (Signal Generator)
Sample Rate 250MSa/s 500MSa/s 1GS/s
Acquisition Mode Sample, Peak Detect
Record Length 8K
Display 3.5" LCD
Waveform Refresh Rate 10000 wfrms/s
Input Coupling DC, AC, Ground
Input Impedance 1MΩ ±2% || 16pF ±10pF
Probe Attenuation 1X, 10X, 100X, 1000X, 10000X
Max Input Voltage 400V (DC + AC Peak-to-Peak)
Bandwidth Limit 20MHz / Full Bandwidth
Sampling Rate Range 5ns/div ~ 1000s/div 5ns/div ~ 1000s/div 2ns/div ~ 1000s/div
Vertical Sensitivity 10mV/div ~ 10V/div
Low Frequency (-3dB) ≥10 Hz (AC coupling)
Rise Time (Typical) ≤5ns ≤3.5ns ≤1.75ns
Trigger Type Edge
Trigger Mode Auto, Normal, Single
Trigger Level Range ±4 div from screen center
Automatic Measurement Period, Frequency, Mean, PK-PK, Max, Min, RMS, Rise Time, Fall Time, +Width, −Width
Cursor Measurement ΔV, ΔT
Communication Interface USB Type-C

Multimeter Specifications

Full Scale Reading 4½ digits (max 20000 count)
Testing Modes Voltage, Current, Resistance, Capacitance, Diode, Continuity
Maximum Input Voltage AC 750V, DC 1000V
Maximum Input Current DC 10A, AC 10A
Diode Test 0–2V

Waveform Generator Specifications

Waveforms Sine, Square, Ramp, Pulse, Arbitrary
Frequency Output Sine: 0.1Hz–30MHz
Square: 0.1Hz–6MHz
Ramp: 0.1Hz–1MHz
Pulse: 0.1Hz–5MHz
Arbitrary: 0.1Hz–5MHz
Sample Rate 125MSa/s
Channel 1
Amplitude 20mVpp–5Vpp (Hi-Z), 10mVpp–2.5Vpp (50Ω)
Waveform Length 8K
Vertical Resolution 14 bits
Load Impedance 1MΩ / 50Ω